Construction Setting Out Surveyor
icelabz provides setting out services for construction projects. Setting out engineers establish survey control, set out grid lines and levels, and verify construction against design.
Setting Out Services
Setting out covers pre-start survey and control establishment. Boundary setting out verified against title plans. Structural setting out for foundations, piles, walls, and columns. As-built verification surveys at each stage. Monitoring surveys for adjacent structures.
All setting out reviewed by senior surveyor. Fixed-fee pricing with no hidden charges.
Fixed-Fee Setting Out
icelabz provides fixed-fee setting out. Survey scope confirmed before instruction. No hidden charges.
Contact icelabz with your construction requirements for a fixed-fee quote.
How a Construction Setting Out Surveyor Works
A construction setting out surveyor is the person who transfers the design to ground with precision. The construction setting out service covers five typical service categories, each scheduled in line with the construction programme. Pre-start survey and control establishment (the initial visit to establish the site survey control, tie the new design to the existing boundary, and set up the reference points that the setting out will be tied back to throughout the project) is typically scheduled one to two weeks before the construction start date. Boundary setting out (verification of the legal boundary against the title plan, typically with markers at agreed intervals) is typically scheduled at the pre-start stage. Structural setting out (transfer of the design to ground for foundations, piles, walls, columns, drainage, and other design elements) is typically scheduled in line with the construction programme, with one to three visits per phase for foundations, drainage, and superstructure. As-built verification surveys (a recorded confirmation of the actual built positions for sign-off and the O and M file) are typically scheduled at the end of the project or at handover. Monitoring surveys for adjacent structures (where the proposed works could affect a neighbouring building) are typically scheduled throughout the construction phase at the trigger levels and reporting frequency. To commission a construction setting out surveyor, send a brief covering the site address, the construction drawings (typically the foundation layout, the drainage layout, and the floor plan with grid lines marked), the coordinate system (OS National Grid with Ordnance Datum Newlyn heights is the UK convention), the target tolerances (typical construction tolerances are plus or minus 10 mm for foundations, plus or minus 5 mm for column positions, plus or minus 3 mm for steelwork, and plus or minus 10 mm for drainage inverts at the chainage), and the construction programme dates when setting out is required. icelabz responds with a fixed-fee quote within twenty-four hours. The cost bands are typical ranges for UK construction setting out work: half-day visit (300 to 500 pounds ex VAT), full day (500 to 900 pounds ex VAT), and day rate contract (300 to 600 pounds ex VAT). A signed accuracy statement is the QA evidence for downstream design, setting out, and construction use, and all icelabz construction setting out work is undertaken to the accuracy bands defined by the RICS Measured Surveys of Land, Buildings and Utilities standard (3rd edition) and is issued with a signed accuracy statement at handover.